SCFT Series Order Form
SCFT SERIES
SCFT SERIES GAS EMERGENCY SHUTOFF SOLENOID VALVE
SCFT gas emergency Shut-off valve is divided into normally closed type and normally open type. When the normally closed shut-off valve is in the open state of the solenoid valve, the coil needs to be energized at the same time. When the coil is powered off, the solenoid valve is closed; Normally open type: when the solenoid valve is opened, the coil does not need to be energized, and when it is closed, only the coil needs to be momentarily energized. Both normally closed and Normally open shut-off valve require manual opening of the solenoid valve. Normally closed shut-off valves require manual opening of the solenoid valve. Normally closed shut-off valve shall be powered on the coil first and then manually opened; Normally open type does not need to energize the coil, and can be opened manually.
Technical Parameters
-
Body material: Aluminum Alloy
-
Seal Material: VITON
-
Applicable media: Gas, Natural Gas, Liquefied petroleum gas, etc.
-
Ambient temp.: -10~60°C
-
Coil: SM Coil, AC220V, DC24V
-
Maximum Working Pressure: 360mbar
-
Turn-off time: <1s
-
Diameter: Φ19mm
-
Flow as the arrow, best position is solenoid vertical and upright direction
External Dimensions Chart
Valve Selection List
Valve Selection List
SLE Series Order Form
SLE SERIES
SLE MANIFOLD TYPE SERIES SOLENOID VALVE
-
2-Way normally closed solenoid valve; closed when energized, open when energized
-
Body Material: Brass / Aluminum (Standard)
-
Ambient Temp.: 0°C~65°C; flow as the arrow, one inlet many outlets(N)
-
Coil can fix Germany NASS Coil, standard voltage: 220VAC / 230VAC / 24VAC 50/60Hz 22VA / 24VA / 24VDC 13W
External Dimensions Chart
Valve Selection List
SLE Series Order Form
SLE SERIES
SLE MANIFOLD TYPE SOLENOID VALVE
Main Technical Parameters
-
2-Way solenoid valve normally closed, closed when de-energized, open when energized
-
One inlet many outlets(n); two inlets many outlets(n)
-
Body material: Brass
-
Internal component: Stainless Steel
-
Seal: NBR (media temp.: < = 80°C)
EPDM (media temp.: < = 120°C)
VITON (media temp.: < = 120°C)
-
Operating media: Water, Hot Water, Gas, Oil (< = 20cst)
-
Orifice: Φ10.0mm
-
Connection: Outlet Connection: 1/4" 3/8" 1/2"
Inlet Connection: 1/2"
-
Operating Pressure: 0~13kgf/cm²
-
Voltage: AC220V 110V 24V 50/60Hz DC24V 12V
-
Power Consumption: AC22VA (13W) DC13W
-
Voltage Tolerance: -10%~+10%
-
Coil type: D = DIN Standard Connections Fully Encapsulated
N = Lead Wires
-
Coils can use NASS Coil
-
Heat resistant class: Class F 155°C Ed100%
-
Ambient Temp.: 0~65°C
External Dimensions Chart
SLJ Series Order Form
SLJ SERIES
SLJ PLATE TYPE, INTERGRATED SERIES SOLENOID VALVE
SLJ1 Normally Closed 3/2-Way Series
SLJ2 Normally Open 3/2-Way Series
SLJ3 Universal 3/2-Way Series
SLJ4 2/2-Way Series
Product Characteristics
SLJ 3/2-Way Series solenoid valve structure compact, installed in integrated plate, Realize the piping to be not moved. Optional installation exchange solenoid valves, according to the requirement of customer mix of integration (At the same time, install 2/2-Way and 3/2-Way solenoid valve on one plate). This product widely used for cylinder valve etc. implementation of the automatic control and air compressor
SLJ SERIES
SLJ1 NORMALLY CLOSED 3/2-WAY SERIES
Valve Selection List
External Dimensions Chart
SLJ SERIES
SLJ2 NORMALLY OPEN 3/2-WAY SERIES
Valve Selection List
External Dimensions Chart
SLJ SERIES
SLJ3 UNIVERSAL 3/2-WAY SERIES
Valve Selection List
External Dimensions Chart
SLJ SERIES
SLJ4 2/2-WAY SERIES
Valve Selection List
External Dimensions Chart
SLM Series Order Form
Valve Selection List
SLM SERIES
SLM 2/2-WAY DIRECT ACTING COMPACT SERIES SOLENOID VALVE
-
2/2-Way solenoid valve, Closed when de-energized, Open when energized
-
Serialized products, small in size, Large flow rate, widely used
-
Body material: Brass, SS316
-
Plunger tube material: Brass, Stainless Steel
-
Ambient temp.: 0~65°C Fluid temp.: 0~120°C
-
Voltage: AC220V DC24V/6W (other voltage can be special made)
-
Flow as the arrow. Best position is solenoid vertical and upright direction
-
This series valves are offered in NBR, VITON, EPDM for series and diaphragm to provide on-off control of various fluids
External Dimensions Chart
SLM SERIES
SLM 2/2-WAY PILOT SOLENOID VALVE
-
Product features: small size, low power, wide range of application
-
Body material: Brass and SST
-
Ambient Temp.: 0°C~65°C Fluid Temp.: 0°C~120°C
-
Voltage: AC220V/6W DC24V/6W (other voltages can be customized)
-
Flow as the arrow, mounts in any position; best position is solenoid vertical and upright
-
Sealing: NBR, EPDM, VITON
Valve Selection List
External Dimensions Chart
SLM Series Order Form
SLM SERIES
SLM 2/2-WAY MINIATURE DIRECT ACTING PLASTIC SOLENOID VALVE
-
Product features: small size, low power, wide range of application
-
Body material: PPS
-
Material of tube: Stainless Steel
-
Ambient temp.: 0°C~65°C Fluid temp.: 0°C~65°C
-
Voltage: AC220V/6VA DC24V/6W (other voltage can be customized)
-
Connection mode: Quick insert ( Φ6.35mm ) G: 1/8
-
Flow as the arrow, mounts in any position; best position is solenoid vertical and upright direction
-
Seal: NBR, EPDM, VITON
External Dimensions Chart
Valve Selection List
SLVM Series Order Form
SLVM SERIES
SLVM 3/2-WAY DIRECT ACTING COMPACT SERIES SOLENOID VALVE
Main Technical Parameters
-
3/2-Way solenoid valve, Closed when de-energized, open when energized
-
Serialized products, small in size, Large flow rate, widely used.
-
Body material: Brass
-
Plunger tube material: Brass, Stainless Steel
-
Ambient temp.: 0~65°C Fluid Temp.: 0~120°C
-
Voltage: AC220V DC24V/6W (other voltage can be special made)
SLVM1 Normally Closed
SLVM2 Normally Open
SLVM3 Diverting
SLVM4 Universal
External Dimensions Chart
SLVM1 Normally Closed
Normally Closed
SLVM2 Normally Open
Normally Open
SLVM3 Diverting
Diverting
SLVM4 Universal
Universal
DMF-Z SERIES
DMF-Z RIGHT ANGLE TYPE LATCHING SOLENOID VALVE
Product Purpose
Pulse solenoid valve (also called diaphragm valve), it is the "switch" injection control instrument by pulse output signal of the control of the filter bag one row (room) injection out dust. Make the resistance of the filter to keep in the scope of the set inside, in order to ensure that the filter processing power and dust collecting efficiency.
DMF-Z type pulse valve as right Angle type valve, The Angle between import and export if 90°, suitable for air bag dust and the installation of the windy spray connection. Airflow unobstructed, can meet the requirements of the clear grey gas pulse.
Working Principle
The pulse valve diaphragm is divided into two, gas chamber (Front & Back), when switching compressed air, Compressed air through the throttle orifice into the gas chamber after at this time gas chamber pressure will diaphragm components.
Close to the valve outlets, pulse valve is in "closed" status. Pulse injection control instrument signal that the pulse valve bit back, after the gas Room put stomatal open, and the gas chamber pressure loss after quickly, diaphragm components moved, the compressed air. A valve lose export injection, pulse valve in the "open" status. Pulse injection control instrument signal disappears, solenoid pulse valve bit reset, gas after.
Room put stomatal closure, the gas chamber pressure after increase is clingy valve diaphragm components of outlets, solenoid pulse valve and in "closed" status.
DMF-Z Series
Valve Series: DMF-Z
Function: Right Angle Type
Seal Material: NBR
Body Material: Aluminum
Pipe Size: 3/4"~2 1/2"
Orifice: 20 ~ 62mm
CV Factor: 7.6 - 52
Valve Selection List
Construction, External Dimension Chart
Structure Size
Installation method
Solenoid pulse valve input(IN) and air bag is connected to the metal the input termed filter in connection with spray wind connection between thread fill in seal material Teflon or seal pushes it's good to tighten the seal.
