Water Filtration and Purification Equipment Supplier
Reverse Osmosis System Parts and Supplier
Commercial and Residential Wave Cyber DI & Pressure Tanks Supplier
Water Filtration Manufacturer Distributor Vendor Water Purification
Vontron RO Nanofiltration Ultrafiltration Membrane Distributor
UF Membranes
Hollow Fiber Pressure UF Series
Introduction
Hollow fiber UF membrane elements are mainly used for remove suspended solid, colloidal and bacteria in water solution, and are widely used in tap water purification, seawater desalination pretreatment and wastewater recycle purification.
Application
Tap water purification;
Desalination pre-treatment;
Wastewater reuse purification.
Aucun article
VUF-2860
Active Membrane Area ft2(m²): 51
Design Flux LMH (L/h): 30~120
Nominal Aperture μm: 0.02
Membrane Filament Material: PVDF
Aucun article
VUF-2880
Active Membrane Area ft2(m²): 77
Design Flux LMH (L/h): 30~120
Nominal Aperture μm: 0.02
Membrane Filament Material: PVDF
Aucun article
VUF-2860T
Active Membrane Area ft2(m²): 51
Design Flux LMH (L/h): 35~120
Nominal Aperture μm: 0.08
Membrane Filament Material: PVDF
Aucun article
Strengthened RO Membrane - Helixfil Series Vontron Technology Co., Ltd. VONTRON Helixfil series strengthened reverse osmosis (RO) membrane elements consists of products of multiple models such as PURO-I, PURO-II, PURO-FRLE, LP400-LD, LP440-MAX, ULP400-LD, ULP440-MAX, LP22-8040PRO and FR22-8040PRO, and enhanced performance for specific application scenarios as compared to conventional membrane elements.
VUF-2880T
Active Membrane Area ft2(m²): 77
Design Flux LMH (L/h): 35~120
Nominal Aperture μm: 0.08
Membrane Filament Material: PVDF
Hollow Fiber MBR Series
Introduction
Hollow fiber ultrafiltration membrane is mainly used to remove suspended solids, colloids, microorganisms, macromolecular organic matters, bacteria and viruses in aqueous solution, and is widely used in the purification and treatment of municipal sewage and industrial wastewater.
Application
Standardized treatment or reuse of municipal wastewater
Standardized treatment or reuse of industrial wastewater
Aucun article
Aucun article
VUF-ME34
Active Membrane Area ft2(m²): 34.4
Design Flux LMH (L/h): 5~30
Nominal Aperture μm: 0.3
Membrane Filament Material: PVDF+PET
VUF-ME40
Active Membrane Area ft2(m²): 40
Design Flux LMH (L/h): 5~30
Nominal Aperture μm: 0.3
Membrane Filament Material: PVDF+PET
Spiral Wound Ultrafiltration Membrane Elements
Introduction
VUF series ultrafiltration membrane is spiral wound polyethersulfone membrane element developed by VONTRON. It has the characteristics of high heat resistance and chemical stability, uniform pore size and high molecule cut off accuracy. The VUF series ultrafiltration membrane element is welded by rotary welding process, which ensures very low fluid resistance and high durability of the membrane element.
Application
VUF series ultrafiltration membrane can effectively remove proteins, viruses, macromolecular organics, pigments, polysaccharides and other macromolecular from water, and permeate inorganic salts, micromolecular pigments, monosaccharides and other micromolecular substances and water. It also can be used for separating different molecular weight materials to achieve the purpose of decolorization, purification and separation and concentration. VUF series ultrafiltration membranes are mainly used in the treatment of electronic ultrapure water, drinking water, municipal water and various industrial water, the pretreatment of RO system, and the separation and concentration of materials in biochemical, pharmaceutical and food industry.
The VUF series is mainly used for separation and concentration of specific material with molecular weight cut off (MWCO) at 4k, 6k, 8k, 10k, 20k, 67k Da. VUF series applies the feed channel spacer of 31, 46 and 90mil, and is favorably equipped with the fiberglass housing or sanitary-grade housing.
Aucun article
VUF8040-4K
Active Membrane Area ft2(m²): 400 (37.2)
Permeate flow GPD(m³/d): 6000 (22.7)
Testing Solution: PEG 4000
Aucun article
VUF-8040-6K
Active Membrane Area ft2(m²): 400 (37.2)
Permeate flow GPD(m³/d): 6500 (24.6)
Testing Solution: PEG 6000
Aucun article
VUF8040-8K
Active Membrane Area ft2(m²): 400 (37.2)
Permeate flow GPD(m³/d): 9500 (35.9)
Testing Solution: PEG 8000
Aucun article
VUF8040-10K
Active Membrane Area ft2(m²): 400 (37.2)
Permeate flow GPD(m³/d): 7000 (26.5)
Testing Solution: PEG 10000
Aucun article
VUF-8040-20K
Active Membrane Area ft2(m²): 400 (37.2)
Permeate flow GPD(m³/d): 10500 (39.7)
Testing Solution: PEG 20000
Aucun article
VUF8040-67K
Active Membrane Area ft2(m²): 400 (37.2)
Permeate flow GPD(m³/d): 25000 (94.6)
Testing Solution: BSA
