top of page

SCFT SERIES

SCFT SERIES GAS EMERGENCY SHUTOFF SOLENOID VALVE 

SCFT gas emergency Shut-off valve is divided into normally closed type and normally open type. When the normally closed shut-off valve is in the open state of the solenoid valve, the coil needs to be energized at the same time. When the coil is powered off, the solenoid valve is closed; Normally open type: when the solenoid valve is opened, the coil does not need to be energized, and when it is closed, only the coil needs to be momentarily energized. Both normally closed and Normally open shut-off valve require manual opening of the solenoid valve. Normally closed shut-off valves require manual opening of the solenoid valve. Normally closed shut-off valve shall be powered on the coil first and then manually opened; Normally open type does not need to energize the coil, and can be opened manually.

Technical Parameters

  • Body material: Aluminum Alloy

  • Seal Material: VITON

  • Applicable media: Gas, Natural Gas, Liquefied petroleum gas, etc.

  • Ambient temp.: -10~60°C

  • Coil: SM Coil, AC220V, DC24V

  • Maximum Working Pressure: 360mbar

  • Turn-off time: <1s

  • Diameter: Φ19mm

  • Flow as the arrow, best position is solenoid vertical and upright direction

Aucun article

External Dimensions Chart

External Dimension

Valve Selection List

Valve Selection

Valve Selection List

Valve Selection 2

SBD SERIES

SBD-A Timing of Drainage Solenoid Valve

Use

Universal electronic drain valve in analog circuit solid match the solenoid valve, electronic timer implementation to the timing of condensed water from compressed air system auto emissions. Drying machine is widely used in filter separator gasholder dripping feet, compressed air system components, discharge time and interval time can be adjusted according to different needs.

Characteristic:

Easy installation Automatic

Time interval and discharge time can be adjusted with the test button

Orifice size: 3mm   Pressure: 16bar

Heat resistance level: H Class  Ip65

Filter configuration ball valves, import and export into 90°C

SBD-A Timing of Drainage Solenoid Valve

Select your product:

Thanks for ordering!

SBD-A Timing of Drainage Solenoid Valve

SBD Series
Valve Series: SBD-A
Function: 2/2-Way Direct Acting
Body Material: Brass
Pipe Size: G1/4"~1/2"
Orifice: 0.23mm 
CV Factor: 3.0

Technology Parameters:

Technology Parameters

Configuration Dimension Chart

Configuration Dimension Chart

SBD SERIES

SBD-B Timing of Drainage Solenoid Valve

Use

Universal electronic drain valve in analog circuit solid match the solenoid valve, electronic timer implementation to the timing of condensed water from compressed air system auto emissions. Drying machine is widely used in filter separator gasholder dripping feet, compressed air system components, discharge time and interval time can be adjusted according to different needs.

Characteristic:

Easy installation Automatic

Time interval and discharge time can be adjusted with the test button

Orifice size: 3mm   Pressure: 16bar

Heat resistance level: H Class  Ip65

Filter configuration ball valves, import and export into 180°C

SBD-B Timing of Drainage Solenoid Valve

Select your product:

Thanks for ordering!

SBD-B Timing of Drainage Solenoid Valve

SBD Series
Valve Series: SBD-B
Function: 2/2-Way Direct Acting
Body Material: Brass
Pipe Size: G1/2"
Orifice: 0.23mm 
CV Factor: 3.0

Technology Parameters:

Technology Parameters

Configuration Dimension Chart

Configuration Dimension Chart

ZXF Series Order Form

ZXF Series  Solenoid Valve

Position Description

Valve Series

Valve
Series

Mode of
Operation

Coil
Type

Coil
Class

Voltage

Seal
Material

Body
Material

Pipe
Size

Orifice
(mm)

1

2

3

4

5

6

7

8

9

Mode of Operation
Coil Class
Coil Type
Voltage
Seal Material
Pipe Size
Orifice (mm)
Body Material

10

Composition

Composition

Thanks! We’ll send you a price quote shortly.

ZXF SERIES

ZXF 2/2-WAY SOLENOID AXIAL VALVE • NORMALLY CLOSED 

  • 2/2-Way Normally Closed, closed when de-energized open, open when energized

  • Working pressure: 0~64kgf/cm²

  • Ambient temp.: 0~65°C

  • Flow as the arrow, mounts in any position; best position is solenoid vertical and upright direction

  • Voltage: AC220V  50Hz  DC24V  +10%~-10%

  • Seals: PU

  • Body: Forged Brass, Stainless Steel

ZXF 2/2-Way Solenoid Axial Valve • SST

Configuration Dimensions Chart

Configuration Dimension Chart
ZXF 2/2-Way Solenoid Axial Valve • Brass

Valve Selection List

Valve Selection List

ZXFV Series Order Form

ZXFV Series  Solenoid Valve

Position Description

Valve Series

Valve
Series

Mode of
Operation

Coil
Type

Coil
Class

Voltage

Seal
Material

Body
Material

Pipe
Size

Orifice
(mm)

1

2

3

4

5

6

7

8

9

Mode of Operation
Coil Class
Coil Type
Voltage
Seal Material
Pipe Size
Orifice (mm)
Body Material

10

Composition

Composition

Thanks! We’ll send you a price quote shortly.

ZXFV SERIES

ZXFV 3/2-WAY SOLENOID AXIAL VALVE • NORMALLY CLOSED 

  • 3/2-Way Solenoid axial valve, Pressure balanced, with spring return, cross conversion

  • Working pressure: 0~40kg/cm²

  • Ambient temp: 0°C~65°C

  • Voltage: AC220V/50Hz  DC24V  +10%~-10%

  • Seals: VITON, EPDM

  • Body: Forged Brass

 

The valve adopts pressure balance design, zero pressure start, and no minimum pressure difference is required; The back pressure is tightly sealed without any leakage; Compact structure, can be applied to the treatment of highly viscous and highly polluting media.​

ZXFV 3/2-Way Solenoid Axial Valve

Configuration Dimensions Chart

Configuration Dimension Chart

Valve Selection List

Valve Selection List

SGH Series Order Form

SGH Series  Solenoid Valve

Position Description

Valve Series

Valve
Series

Mode of
Operation

Coil
Type

Coil
Class

Voltage

Seal
Material

Body
Material

Pipe
Size

Orifice
(mm)

1

2

3

4

5

6

7

8

9

Mode of Operation
Coil Class
Coil Type
Voltage
Seal Material
Pipe Size
Orifice (mm)
Body Material

10

Composition

Composition

Thanks! We’ll send you a price quote shortly.

SGH SERIES

SGH COMPACT SERIES 2/2-WAY DIRECT ACTING SOLENOID VALVE • NORMALLY CLOSED

  • 2-Way Normally Closed solenoid valve, Closed when de-energized, open when energized. Serialized products, small in size, large flow rate, widely used

  • Working pressure: 0~20kgf/cm²

  • Body material: Brass

  • Ambient temp.: 0°C~65°C

  • Voltage: AC220V/50Hz  DC24V  -10%~+10%  Voltage Tolerance

  • This series valves are offered NBR, VITON, EPDM

  • Medium: Gas, liquid<20cst

  • Flow as the arrow, mounts in any position; Best position is solenoid vertical and upright direction

SGH Compact Series 2/2-Way Direct Acting Solenoid Valve • Normally Closed

Configuration Dimensions Chart

Construction, External Dimension Chart

Valve Selection List

Valve Selection List

SGH SERIES

SGH COMPACT SERIES 2/2-WAY DIRECT ACTING SOLENOID VALVE • NORMALLY OPEN

  • 2-Way Normally Open solenoid valve, Open when de-energized, Closed when energized. Serialized products, small in size, large flow rate, widely used

  • Working pressure: 0~20kgf/cm²

  • Body material: Brass

  • Ambient temp.: 0°C~65°C

  • Voltage: AC220V/50Hz  DC24V  -10%~+10%  Voltage Tolerance

  • This series valves are offered NBR, VITON, EPDM

  • Medium: Gas, liquid<20cst

  • Flow as the arrow, mounts in any position; Best position is solenoid vertical and upright direction

SLK Plastic Series 2/2-Way Irrigation Solenoid Valve • Normally Closed

Configuration Dimensions Chart

Construction, External DImension Chart • Normally Open

Valve Selection List

Valve Selection List • Normally Open

SLK Series Order Form

SLK Series  Solenoid Valve

Position Description

Valve Series

Valve
Series

Mode of
Operation

Coil
Type

Coil
Class

Voltage

Seal
Material

Body
Material

Pipe
Size

Orifice
(mm)

1

2

3

4

5

6

7

8

9

Mode of Operation
Coil Class
Coil Type
Voltage
Seal Material
Pipe Size
Orifice (mm)
Body Material

10

Composition

Composition
Pipe Size
Orifice (mm)

Thanks! We’ll send you a price quote shortly.

SLK SERIES

SLK PLASTIC SERIES 2/2-WAY IRRIGATION SOLENOID VALVE • NORMALLY OPEN

This 2/2-Way normally closed type valve is one of the most widely used in garden irrigation solenoid valve. Widely used in landscape of large area lawn, stadium, agriculture in water treatment equipment.

SLK Plastic Series 2/2-Way Irrigation Solenoid Valve • Normally Closed

  1. Pilot operated diaphragm structure, body material is NYLON

  2. Double filtration, prevent block the valve

  3. Waterproof coil

  4. Close slowly, Prevent water hammer

  5. Manual function (Coil turn around 3/4)  Fluid medium: Water

Medium temperature: 0~42°C  ambient temperature:  0~52°C

Connect: BSPT 1/2"~4",  Flange Connection

Coil Voltage: AC24V,  AC220V,  AC110V  50/60Hz,  10VA,  DC24V  5W

          Latching Coil: DC6V~20V

          Body Material: NYLON

          Seal: NBR, EPDM, VITON

          Plunger: 430F

          Spring: SS304

          Divided magnetic ring-purple copper

Valve Selection List

Valve Selection List

SLK Series Coils Characteristics List

SLK Series Coils Characteristics List

SLY Series Order Form

SLY Series  Solenoid Valve

Position Description

Valve Series

Valve
Series

Mode of
Operation

Coil
Type

Coil
Class

Voltage

Seal
Material

Body
Material

Pipe
Size

Orifice
(mm)

Options

1

2

3

4

5

6

7

8

9

10

Mode of Operation
Coil Class
Coil Type
Voltage
Seal Material
Pipe Size
Orifice (mm)
Body Material
Options

Thanks! We’ll send you a price quote shortly.

SLY SERIES

SLY 2/2-WAY SOLENOID VALVE • NORMALLY OPEN

2-Way normally open solenoid valve, Open when de-energized, Closed when energized. Serialized products, small in size, large flow rate, widely used.

  1. Voltage: AC220V/50Hz  DC24V

  2. Working pressure: 0~30bar

  3. Orifice:  Φ1.0~Φ2.5mm

  4. Fluids Temp.: 0~120°C

  5. Body material: Brass / SST

  6. This series valves are offered in NBR, VITON, EPDM

SLY 2/2-Way Solenoid Valve • Brass
SLY 2/2-Way Solenoid Valve • SST

Valve Selection List

Valve Selection List

External Dimensions Chart

External Dimension Chart
bottom of page